基于堆积层厚度变化的侏罗系顺向岸坡变形机制转换研究     

张全  黄波林  陈小婷  王健 《华南地质与矿产》2019,35(3):354-360

三峡库区侏罗系顺向岸坡堆积体滑坡众多,其滑动模式存在一定差异。首先统计分析了192个三峡库区侏罗系层位发育的堆积体滑坡滑体及碎石土的工程地质性质和强度参数。在此基础上,运用数值分析软件对堆积体厚度变化引起的滑坡变形机制进行模拟分析。结果表明:堆积体厚度范围在15m及以下滑坡会沿着岩土界线面滑动、15~35m时滑坡会沿着层内剪切面滑动;厚度范围在35m以上时,堆积体滑坡内部可能存在着多层滑带,即滑坡可能沿着层内剪切面滑动或者沿着岩土界线面滑动。堆积体厚度范围在15m及以下时滑坡的治理措施可采用布置抗滑桩;厚度范围15~35m时可采用排水+布置抗滑桩的滑坡治理措施;厚度范围在35m以上时,可采用滑坡前期监测预报+后期根据滑坡发育情况相结合的滑坡防治措施。  相似文献   

脱气温度和样品粒径对致密砂岩低温氮气吸附实验结果的影响     

李传明  薛海涛  王民  卢双舫  李进步  田伟超 《矿物岩石地球化学通报》2019,(2):308-316

基于静态体积法的低温氮气吸附实验已广泛用于分析致密储集层的孔隙结构。本文探索了脱气温度和样品粒径对松辽盆地高台子致密砂岩低温氮气吸附实验结果的影响。结果显示,110℃的脱气条件并不能清除束缚水而使得孔隙体积、比表面积均偏低,300℃的脱气条件容易破坏样品中黏土矿物的结构令孔隙体积、比表面积减小,200℃是比较合适的脱气温度,既能去除束缚水又不破坏黏土矿物结构。样品粒径从5～10目减小至10～30目,氮气探测的孔隙数量增多使比表面积、孔体积增大。从10～30目减小至180～200目,黏土矿物相对含量降低令比表面积、孔体积显著减小;小于200目的样品中减少的黏土矿物主要集中在大于200目的岩样中,因此大于200目岩样的测定结果最高。因此,10～30目是利用低温氮气吸附实验寻求分析致密砂岩储集层特征的最佳粒径范围。  相似文献   

近60a来洞庭湖水位演变特征及其影响因素     

周蕾  李景保  汤祥明  周永强  黎昔春 《冰川冻土》2017,39(3):660-671

基于1956-2015年洞庭湖主要控制站实测水文数据,运用Mann-Kendall检验法、主成分分析法对比分析了近60 a来洞庭湖东、南、西三个湖区水位演变特征及其影响因素。结果表明：从调弦口堵口至葛洲坝截流后,南咀和城陵矶站同流量下水位均升高,但南咀站平均水位受三口分流能力减弱而下降（0.03 m）,城陵矶站平均水位受湖盆泥沙淤积和长江干流顶托作用而上升（1.33 m）;三峡水库运行后,湖盆冲淤基本持平,湖泊同流量下水位基本不变,由于该时段长江流域整体为相对枯水期,因而与葛洲坝截流后相比湖泊年平均水位下降约0.31~0.58 m。近60 a来南咀站平均水位呈显著下降趋势（p<0.05）,而城陵矶站水位呈显著上升趋势（p<0.01）,说明湖泊水位影响因素作用存在空间异质性。洞庭湖年内水位存在涨（4-5月）~丰（6-9月）~退（10-11月）~枯（12月-次年3月）的变化特征,葛洲坝运行期丰水期水位上涨明显,三峡运行期各月水位均有下降,受水库调度方式影响7-10月水位降幅最大。洞庭湖流域降水量、四水入湖和出湖径流大小以及长江干流水情是洞庭湖水位变化的主要影响因素,三口来沙变异条件下的洞庭湖冲淤量变化是湖泊水位变化的次要因素。  相似文献   

中国海相碳酸盐岩的分布及油气地质基础问题   总被引：3，自引：0，他引：3  

马永生  何登发  蔡勋育  刘波 《岩石学报》2017,33(4):1007-1020

中国海相碳酸盐岩在陆上与海域广泛分布,尤以陆上最具特色。中国大陆由小克拉通地块、微地块及其间的造山带镶嵌构成,发育于这些克拉通上的海相古生代盆地规模小、盆内分异明显、盆缘改造强烈,受中新生代巨厚沉积物覆盖,海相碳酸盐岩埋深大、热演化程度高,储集层非均质性强,油气成藏与分布复杂。自威远、靖边气田发现以来,尤其是近年塔河、普光、元坝、安岳等大型油气田发现以来,海相碳酸盐岩的油气勘探前景逐渐明朗。长期的勘探实践发现了海相碳酸盐岩发育礁滩体、白云岩、岩溶缝洞体、裂缝带等四类储集体,它们受沉积、成岩与构造演化的共同制约;礁/滩储层、斜坡区岩溶、风化壳岩溶、裂缝带均可大规模成藏。目前,海相碳酸盐岩的深化研究与持续勘探面临一系列重大难题。在基础科学层面,古老生物群落、古生态、古气候与古地理特征及其耦合关系,克拉通盆地的成因与构造-沉积分异机制,原始盆地面貌及其演化过程,沉积充填动力学等研究方面亟待加强;在油气勘探应用层面,在岩相古地理重建、碳酸盐岩台地边缘精细刻画与台地内部结构细化、碳酸盐岩储集层多期叠加改造机理、岩溶储集层成因分类、非均质碳酸盐岩储集层描述和评价技术等研究方面需要不断深入,在源-储配置、油气成藏过程、油气保存与调整再分配,油气富集规律方面需要深入探索。建议整体与动态研究海相碳酸盐岩层系的"成盆-成岩-成储-成藏"的全要素、全过程,厘定古裂陷槽、古台地、古隆起的分布,落实烃源岩、有利储集层(礁滩体、白云岩、顺层与层间岩溶、裂缝带等)的分布及其配置关系,构建符合实际的油气成藏模式,为油气资源潜力评价和有利区带预测奠定基础,促进中国海相碳酸盐岩油气勘探的持续发现。  相似文献   

川中磨溪—高石梯地区下寒武统龙王庙组层序格架内滩体的发育演化特征及对储层的控制     

王頔  胡明毅  高达  邢梦妍  汪涛  刘泠杉  王静怡 《海相油气地质》2017,22(1)

川中磨溪—高石梯地区龙王庙组可划分为两个三级层序。通过大量岩心、薄片以及测井资料综合分析,磨溪—高石梯地区龙王庙期整体属于局限台地沉积,可划分为台内滩、滩间洼地以及潟湖亚相。以台内滩颗粒含量、沉积构造以及单层滩体沉积厚度为基础,结合测井响应特征分析,将台内滩划分为滩核、滩翼以及白云岩坪等微相,并建立了台内滩的3种典型沉积序列:滩翼—滩核—白云岩坪、潟湖—滩间洼地—台内滩,以及滩间洼地—台内滩。层序格架内台内滩的纵横向发育特征表明:SQ_2时期较SQ_1时期更为发育,滩体单层厚度和总厚度均较大,层序界面附近的滩核—白云岩坪沉积序列上部为最有利的储层发育相带。  相似文献   

Lithofacies paleogeography mapping and reservoir prediction in tight sandstone strata: A case study from central Sichuan Basin,China     

Yuan Zhong  Lu Zhou  Xiucheng Tan  Chengbo Lian  Hong Liu  Jijia Liao  Guang Hu  Mingjie Liu  Jian Cao 《地学前缘(英文版)》2017,8(5):961-975

Sand-rich tight sandstone reservoirs are potential areas for oil and gas exploration. However, the high ratio of sandstone thickness to that of the strata in the formation poses many challenges and uncertainties to traditional lithofacies paleogeography mapping. Therefore, the prediction of reservoir sweet spots has remained problematic in the field of petroleum exploration. This study provides new insight into resolving this problem, based on the analyses of depositional characteristics of a typical modern sand-rich formation in a shallow braided river delta of the central Sichuan Basin, China. The varieties of sand-rich strata in the braided river delta environment include primary braided channels, secondary distributary channels and the distribution of sediments is controlled by the successive superposed strata deposited in paleogeomorphic valleys. The primary distributary channels have stronger hydrodynamic forces with higher proportions of coarse sand deposits than the secondary distributary channels. Therefore, lithofacies paleogeography mapping is controlled by the geomorphology, valley locations, and the migration of channels. We reconstructed the paleogeomorphology and valley systems that existed prior to the deposition of the Xujiahe Formation. Following this, rock-electro identification model for coarse skeletal sand bodies was constructed based on coring data. The results suggest that skeletal sand bodies in primary distributary channels occur mainly in the valleys and low-lying areas, whereas secondary distributary channels and fine deposits generally occur in the highland areas. The thickness distribution of skeletal sand bodies and lithofacies paleogeography map indicate a positive correlation in primary distributary channels and reservoir thickness. A significant correlation exists between different sedimentary facies and petrophysical properties. In addition, the degree of reservoir development in different sedimentary facies indicates that the mapping method reliably predicts the distribution of sweet spots. The application and understanding of the mapping method provide a reference for exploring tight sandstone reservoirs on a regional basis.  相似文献   

Characteristics and petroleum origin of the Carboniferous volcanic rock reservoirs in the Shixi Bulge of Junggar Basin,western China     

《Marine and Petroleum Geology》2017

Shixi Bulge of the central Junggar Basin in western China is a unique region that provides insight into the geological and geochemical characteristics of large-scale petroleum reservoirs in volcanic rocks of the western Central Asian Orogenic Belt. Carboniferous volcanic rocks in the Shixi Bulge mainly consist of striped lava and agglomerate, as well as breccia lava and tight tuff. Volcanic rocks differ in porosity and permeability. Striped lava exhibits the highest porosity (average: 14.2%) but the lowest permeability (average: 0.67 × 10⁻¹⁵ m) among the rock types. Primary gas pores are widely developed and mostly filled. Secondary dissolution pores and fractures are two major reservoir storage spaces. Capillary pressure curves suggest the existence of four pore structure types of reservoir rocks. Several factors, namely, lithology, pore structure, and various diagenesis, govern the physical properties of volcanic rocks. The oil is characterized by a high concentration of tricyclic terpane, a terpane distribution of C₂₃ < C₂₁ > C₂₀, and sterane distributions of C₂₇ < C₂₈ < C₂₉ and C₂₇ > C₂₈ < C₂₉. Oil and gas geochemistry revealed that the oil is a mixture derived primarily from P₂w source rock and secondarily from P₁j source rock in the sag west of Pen-1 Well. The gases are likely gas mixtures of humic and sapropelic organic origins, with the sapropelic gas type dominant in the mixture. The gas mixture is most likely cracked from kerogen rather than oils. The Carboniferous volcanic reservoirs in Shixi Bulge share some unique characteristics that may provide useful insights into the various roles of different volcanic reservoir types in old volcanic provinces. The presence of these reservoirs will undoubtedly encourage future petroleum exploration in volcanic rocks up to the deep parts of sedimentary basins.  相似文献   

Prediction of diagenetic facies using well logs – A case study from the upper Triassic Yanchang Formation,Ordos Basin,China     

《Marine and Petroleum Geology》2017

Understanding diagenetic heterogeneity in tight sandstone reservoirs is vital for hydrocarbon exploration. As a typical tight sandstone reservoir, the seventh unit of the Upper Triassic Yanchang Formation in the Ordos Basin (Chang 7 unit), central China, is an important oil-producing interval. Results of helium porosity and permeability and petrographic assessment from thin sections, X-ray diffraction, scanning electron microscopy and cathodoluminescence analysis demonstrate that the sandstones have encountered various diagenetic processes encompassing mechanical and chemical compaction, cementation by carbonate, quartz, clay minerals, and dissolution of feldspar and lithic fragments. The sandstones comprise silt-to medium-grained lithic arkoses to feldspathic litharenites and litharenites, which have low porosity (0.5%–13.6%, with an average of 6.8%) and low permeability (0.009 × 10⁻³ μm² to 1.818 × 10⁻³ μm², with an average of 0.106 × 10⁻³ μm²).This study suggests that diagenetic facies identified from petrographic observations can be up-scaled by correlation with wire-line log responses, which can facilitate prediction of reservoir quality at a field-scale. Four diagenetic facies are determined based on petrographic features including intensity of compaction, cement types and amounts, and degree of dissolution. Unstable and labile components of sandstones can be identified by low bulk density and low gamma ray log values, and those sandstones show the highest reservoir quality. Tightly compacted sandstones/siltstones, which tend to have high gamma ray readings and relatively high bulk density values, show the poorest reservoir quality. A model based on principal component analysis (PCA) is built and show better prediction of diagenetic facies than biplots of well logs. The model is validated by blind testing log-predicted diagenetic facies against petrographic features from core samples of the Upper Triassic Yanchang Formation in the Ordos Basin, which indicates it is a helpful predictive model.  相似文献   

Breaching-related turbidites in fluvial and estuarine channels: Examples from outcrop and core and implications to reservoir models     

《Marine and Petroleum Geology》2017

An understanding of the paleoenvironment and the main sedimentary processes behind preserved deposits is crucial to correctly interpret and represent lithofacies and facies associations in geomodels that are used in the hydrocarbon industry, particularly when a limited dataset of cores is available. In this paper a fairly common facies association is discussed containing massive sands - here defined as thick (>0.5 m) structureless sand beds devoid of primary sedimentary structures, or with some faint lamination - deposited by mass failures of channel banks in deep fluvial and estuarine channels. Amongst geologists it is generally accepted that liquefaction is the main trigger of large bank failures in sandy subaqueous slopes. However, evidence is mounting that for sand deposits a slow, retrogressive failure mechanism of a steep subaqueous slope, known as breaching, is the dominant process. A model of breaching-induced turbidity current erosion and sedimentation is presented that explains the presence of sheet-like massive sands and channel-like massive sands and the sedimentary structures of the related deposits. Sheet-like packages of spaced planar lamination that are found together with massive sand bodies in deposits of these environments are identified as proximal depositional elements of breach failure events. The model, acquired from sedimentary structures in deposits in the Eocene estuarine Vlierzele Sands, Belgium, is applied to outcrops of the Dinantian fluvial Fell Sandstone, England, and cores of the Tilje and Nansen fms (Lower Jurassic, Norwegian Continental Shelf). The possible breach failure origin of some other massive sands described in literature from various ancient shallow water environments is discussed. Breach failure generated massive sands possibly also form in deep marine settings. The potentially thick and homogeneous, well-sorted sand deposits bear good properties for hydrocarbon flow when found in such an environment. However, in case of deposition in an estuarine or fluvial channel, these sand bodies are spatially constricted and careful facies interpretation is key to identifying this. When constructing a static reservoir model, this needs to be considered both for in-place volume calculations as well as drainage strategies.  相似文献   

Kilometer-scale fault-related thermal anomalies in tight gas sandstones     

《Marine and Petroleum Geology》2017

Upper Carboniferous sandstones make one of the most important tight gas reservoirs in Central Europe. This study integrates a variety of geothermometers (chlorite thermometry, fluid inclusion microthermometry and vitrinite reflection measurements) to characterize a thermal anomaly in a reservoir outcrop analog (Piesberg quarry, Lower Saxony Basin), which is assumed responsible for high temperatures of circa 300 °C, deteriorating reservoir quality entirely. The tight gas siliciclastics were overprinted with temperatures approximately 90–120 °C higher compared to outcropping rocks of a similar stratigraphic position some 15 km to the west. The local temperature increase can be explained by circulating hydrothermal fluids along the fault damage zone of a large NNW-SSE striking fault with a displacement of up to 600 m in the east of the quarry, laterally heating up the entire exposed tight gas sandstones. The km-scale lateral extent of this fault-bound thermal anomaly is evidenced by vitrinite reflectance measurements of meta-anthracite coals (VR_rot ∼ 4.66) and the temperature-related diagenetic overprint. Data suggest that this thermal event and the associated highest coalification was reached prior to peak subsidence during Late Jurassic rifting (162 Ma) based on K-Ar dating of the <2 μm fraction of the tight gas sandstones. Associated stable isotope data from fluid inclusions, hosted in a first fracture filling quartz generation (T ∼ 250 °C) close to lithostatic fluid pressure (P ∼ 1000 bars), together with authigenic chlorite growth in mineralized extension fractures, demonstrate that coalification was not subject to significant changes during ongoing burial. This is further evidenced by the biaxial reflectance anisotropy of meta-anthracite coals. A second event of quartz vein formation occurred at lower temperatures (T ∼ 180 °C) and lower (hydrostatic) pressure conditions (P ∼ 400 bars) and can be related to basin inversion. This second quartz generation might be associated with a second event of illite growth and K-Ar ages of 96.5–106.7 Ma derived from the <0.2 μm fraction of the tight gas sandstones.This study demonstrates the exploration risk of fault-bound thermal anomalies by deteriorating entirely the reservoir quality of tight gas sandstones with respect to porosity and permeability due to the cementation with temperature-related authigenic cements. It documents that peak temperatures are not necessarily associated with peak subsidence. Consequently, these phenomena need to be considered in petroleum system models to avoid, for example, overestimates of burial depth and reservoir quality.  相似文献